Pursuant to FCC Enforcement Advisory No. 2018-03 (DA-18-980) Houston Ham Radio Supply, Inc., is currently NOT selling any Baofeng radios.
High Output 7 Watt UV-82HP
The UV-82HP is the second generation of the classic UV-82 Series. Some new features found in the UV-82HP are the three selectable power levels (Low - 1 watt, Medium - 5 watt, High- 7 watt) allowing for a high-output of seven watts.
What Makes it Unique?
- It has 3 Power Levels (1, 5, 7 watt).
- VFO/ MR (Frequency Mode) can be locked via software.
- The Dual Push-to-Talk Switch can be synchronized via software to simplify operation of the radio.
- A new 80 Page In-Depth User's Guide.
- It includes the High Gain V-85 Antenna to Optimize Performance.
- Full Accessory Compatibility with all UV-82 accessories.
- Multiple Tone Burst Options on a new user menu. Selectable Tone Burst Options Include: 1000hz, 1450hz, 1750hz, 2100hz.
Customize Your Operation With Channels, Programmable Buttons, And More.
You can program your UV-82HP exactly how you want it. There are 128 programmable memory channels. You can add or remove channels from scanning list using the free computer software. You can give channels alphanumeric names, using a computer. The radio has 3 power levels (7 watt maximum), allowing you to choose how far you can communicate. You can set VFO limits using the CHIRP software. You can easily program the radio from the keypad and programming from a PC allows even more options to set-up your radio to operate exactly as needed.
Frequency range: [TX] 136 - 174MHz, 400 - 520MHz, [RX] 136 - 174MHz, 400 - 520MHz, 68-108MHz (FM Broadcast).
What's in the box:
UV-82HP Radio Body, 1800mAh Battery, High Gain Antenna, Earpiece with Remote Mic, Desktop Charger, 120 volt AC Adapter, Belt Clip, Wrist Strap.
Dual or Single Push-to-Talk Selectable
The UV-82 Series come with a dual push-to-talk button. The dual PTT allows you to transmit on two frequencies by the use of the rocker push-to-talk switch. By pressing 'up' you can transmit on 'Frequency A' and by pushing down you can transmit on 'Frequency B'.
Frequency A or B can also be used as a scanner of channels, frequencies, CTCSS and DTS tones.
Note: The BaoFeng UV-82HP allows you to synchronize the PTT button to re-enable a single Push-to-Talk switch. This simplifies the use for those who require only one frequency to talk on.
The UV-82HP also includes: External Accessory Compatibility, FM Radio, Flashlight, Emergency Alarm.
The UV-82HP has one built-in receiver but can 'watch' two channels/frequencies (semi duplex). The UV-82HP will monitor both frequencies giving priority to the first station to receive an incoming call.
The UV-82HP supports CTCSS, DCS, and DTMF calling methods. Tone calling (private line) is required by most repeater applications and the UV-82HP supports the latest standards.
The UV-82HP can send DTMF tones. This allows for sending ANI (Caller ID) or remote commands that require DTMF tones.
The UV-82HP is able to Transmit on Narrowband (12.5kHz) and Wideband (25kHz).
BaoFeng UV-82 Series Radio
The UV-82 series is BaoFeng's most commercialized radio series. Compared to the UV-5R and other previous series; the UV-82 radios come with a much louder speaker (1 watt), while other current BaoFeng radios use a 700mW speaker.
The UV-82 series radios also have a more solid case that employ larger buttons as well compared to the previous BaoFeng series. The UV-82HP uses the latest BaoFeng chipset and PCB board that outperforms the range, accuracy, and output of the previous BaoFeng chipsets.
It is not simply a remake but a new radio from the ground up.